FEATURES:

• Repairs under active leak up to 150 psi (11 kg/cm²) pressure
• No shutdown required
• Works on any metal or non-metal pipes
• Applicable to pipes up to 18″ (457 mm) diameter
• Repairs leak in 15 minutes
• Withstand pressure up to 500 psi (35 kg/cm²)
• Withstand temperature up to 200 °C (392 °F)
• Safe for drinking water and resistant to most chemicals
• Ideal for pipeline reinforcement

APPLICABLE MATERIAL:

• Steel
• Copper
• Aluminium
• Galvanized steel
• PVC
• CPVC

• Stainless steel
• Polyethylene
• Polypropylene
• Cast-iron
• Concrete
• FRP/GRE

CHEMICAL RESISTANCE:

• Oil
• Water (drinking water, wastewater, steam)
• Solvents (acetone, toluene, MEK, ethyl alcohol)
• Mild acids (hydrochloric acid, sulfuric acid) and alkalis
• Chemical (ethylene glycol, xylenes, ammonia)
• Hydrocarbons
• Bases
• Slurries
• Fuels (petroleum, diesels, gasoline)
• Gases (LNG, LPG)
• Organic salts

WORKING TIME (FIBERGLASS TAPE):

CURING TIME:

• 30 minutes at 30 °C (86 °F)
• Heat may be applied to decrease curing time
• Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.

APPLICATION:

• Pipe repairs
• Active pipe leaks
• Sealing joints
• Hazardous material spill control
• Reinforce thinning walls
• Repairs in hard to reach areas
• Underwater repairs

OPERATING TEMPERATURE:

OPERATING PRESSURE:

• Recommended for pressure up to 500 psi (35 kg/cm²)
• (Result vary depending on pipe size, type of pipe, hole size, pipe content and method of application)

APPLICABLE INDUSTRIES:

Building & Facilities

Electronics

Industrial Processing

Irrigation

Oil & Gas

Chemical

Manufacturing Plants

Marine

Military

Offshore

Food Processing

Petrochemical

Pharmaceutical

Power Generation

Pulp & Paper

Wastewater

Water Distribution

WRAP SEAL ULTRA ACTIVE LEAK REPAIR PROCEDURE:

1Minimize the flow rate and reduce system pressure

2Roughen the area to be repaired

3Knead the Seal Stic

---

4Place the Seal Stic away from the leak location

5Start wrapping the SealXpert Ultra Sealing Tape a few distances away from the leak location

6Continue to wrap SealXpert Ultra Sealing Tape onto pipe while pushing the Seal Stic onto leak location

---

7Immerse Wrap Seal Fiberglass Tape into water

8Wrap the Wrap Seal Fiberglass Tape above the repair tape as tightly and evenly as possible, using the entire roll

9Discard the plastic tube at the end of the roll

---

10Wet gloves in water and quickly compress the bubbling resins back into the fiberglass wrap until all bubbling has stopped. Repair completed with smooth and hard ivory appearance

PACKAGE:

• 1 roll of Wrap Seal Fiberglass Tape
  • 2″ x 6′ (50 mm x 1.8 m)
  • 2″ x 12′ (50 mm x 3.6 m)
  • 3″ x 9′ (75 mm x 2.7 m)
  • 4″ x 12′ (100 mm x 3.6 m)
• 1 roll of SealXpert Ultra Sealing Tape
  • 1″ x 16′ (25 mm x 5 m)
  • 1″ x 16′ (25 mm x 5 m)
  • 1¼” x 16′ (32 mm x 5 m)
  • 2″ x 16′ (50 mm x 5 m)
• 1 unit of Seal Stic Quick Cure Epoxy
• 1 pair of latex gloves
• Operating instruction